论文部分内容阅读
1.当水温超过95℃时,应立即停车,怠速降温;如要添水,需待水温下降至80℃以下;揭水箱盖时,脸部要躲开,以免水汽冲出烫伤;加水宜细流,加水过急时易产生二次喷水,有关部件会骤冷变形,甚至炸裂缸盖;若缸盖因高温变色,应熄火,慢摇曲轴以免粘缸。坚持用软水作冷却水以减少水垢;如无软
1. When the water temperature exceeds 95 ℃, should immediately stop, idle speed cooling; To add water, until the water temperature dropped to 80 ℃ below; exposing the lid, the face to escape, so as to avoid scalding out of water vapor; add water to trickle , Add water too quickly prone to secondary water spray, the relevant components will be cold deformation, and even burst cylinder head; if the cylinder head due to high temperature discoloration, turn off the flame, slow crank crankshaft to avoid sticky cylinder. Insist on cooling water with soft water to reduce scale; if no soft