论文部分内容阅读
[!--newstext--]
[!--title--]
【摘 要】
：
A novel yttrium citrate-templated conversion method for morphology controlled synthesis ofY2O3 microspheres,microflowers and microsheets was reported for the fi
【机 构】
：
Key Laboratory of Transparent Opto-Functional Inorganic Materials,Graduate School of Chinese Academy
【出 处】
：
稀土学报（英文版）
【发表日期】
：
2004年期
其他文献
比较了纳米Cu-13.2Al-5.1Ni形状记忆合金和初始粗晶结构合金的结构和性能.采用熔体旋淬技术,通过快速凝固制备纳米Cu-Al-Ni薄带.利用XRD、SEM、AFM和DSC等技术表征了纳米结构
研究了2524铝合金在固溶处理后立即预拉伸对随后在170℃时效的硬度和微观组织的影响.测量了在不同预拉伸条件下的时效硬度,并通过透射电镜观察其微观组织.结果表明:与未拉伸
Investigation on the amounts of Na2CO3 and sulphur to obtain pure Y2O2S and up-conversion luminescen
The process to prepare pure phase of hexagonal Y2O2S was investigated.Effect of mixed flux of Na2CO3 and S amounts was studied.The phase composition and morphol
The goal of this work is aimed to improve the power conversion efficiency of single crystalline silicon-based photovoltaic (PV) cells by using the solar spectra
Effects of nitriding modification on surface phase structure,morphology,corrosion resistance and magnetostriction of (Tb,Dy)Fe2 alloy were investigated by nitro
经过公安教育战线几代人艰苦卓绝的努力,公安技术学科被批准确立为一级学科国家重点学科.作为公安技术学科的一个分支,安全防范技术与工程专业面临一个优越的发展机遇,亦面临
Mechanism and microstructure of nickel-ceria composite coatings prepared by pulse current deposition
In recent research,a novel method combined with pulse current (PC) deposition and the ultrasonic (U) field was used to fabricate pure nickel and nickel-ceria co
对低温下采用Zn-5Al钎料超声辅助钎焊2024铝合金进行研究.在温度为400℃时,采用功率为200 W、振幅为15μm、频率为21 kHz的超声对试样实施连接.采用超声波来加速Al从母材到焊
近年来关于家用液化石油气爆炸事故的新闻报道比比皆是,家用液化石油气的安全问题受到人们越来越多的关注.论文主要针对液化石油气的理化性质及其泄漏爆炸危害特点,分析了家
Characterization of microstructure in high strength Mg96Y3Zn1 alloy processed by extrusion and equal
The Mg96Y3Zn1 alloy processed by extrusion and equal channel angular pressing (ECAP) was investigated.It was found that the Mg96Y3Zn1 alloy processed by extrusi