小胡修理 S195柴油机,在安装时不慎造成齿轮室盖和喷油泵壳体裂纹,不得已花钱买了新件,请来高师傅安装。高师傅把喷油泵与齿轮室盖组装后,用手怪慢把齿轮室盆推向缸体,当离虹体接触平面有7毫米左右缝隙时,他用17号扳手卸下喷油泵下部的泵油扳手座闷头,用改谁扮起油泵括柱,同时用力推 Xiao Hu repair S195 diesel engine, accidentally caused the gear chamber cover and injection pump housing cracks during installation, had to spend money to buy a new piece, please master installation. High master to the fuel pump and the gear chamber cover assembly, the strange hand slow gear box to the cylinder body, when the contact surface of the rainbow body about 7 mm gap, he used the 17 wrench to remove the pump under the pump Seat oil wrench seat bulkhead, who play with the pump to change the column, while pushing hard