合肥小汽车修配厂集行业之优点,视本厂的实际情况,对喷、烤漆工艺进行了改造,自行设计了低温喷、烤漆新工艺。这项工艺不仅成本低,还提高了汽车表面装饰质量,有效地控制了喷漆时漆雾飞溅造成的环境污染,从而保证了工人的身心健康。一、喷、烤漆房设计要求 (1)新工艺要求喷、烤漆一条龙作业,所用漆料为进口或国产自干型聚氨酯烘漆或低温氨基漆,在设计时应予考虑。 (2)喷漆房要求封闭性好、宽敞明亮。要考虑室内形成上下贯通的无形风幕(风流定向)所需的空气流量及风速。 (3)烤漆房要求封闭、保温性好。需考 Hefei car repair factory set the advantages of the industry, depending on the actual situation of the factory, the spray, baking process has been modified to design a low-temperature spray, paint new technology. The process is not only low-cost, but also improve the quality of automotive surface decoration, paint spraying effectively control the pollution caused by fog, thus ensuring the physical and mental health of workers. First, the spray, paint room design requirements (1) the new process requirements spray, paint one-stop operation, the paint used for import or domestic self-drying polyurethane baking paint or low temperature amino paint, should be considered in the design. (2) spray paint room requirements closed, bright and spacious. To consider indoor up and down through the formation of intangible wind curtain (Merry orientation) required air flow and wind speed. (3) paint room requirements closed, good thermal insulation. Need to test