论文部分内容阅读
浮选前矿浆准备的目的,是要造成一个有利于目的矿物浮游的环境,最大限度的回收有价金属。在这方面如何能使药剂很好地作用于矿石表面具有非常重要的意义。应該严格掌握用药数量,因为各种药剂的添加数量过多或不足,都能給予浮选过程以不良影响。为达到各种药剂都能充分与矿物表面发生作用,药剂添加地点和攪拌时間要经过实验来决定。我矿通过試验研究,较比科学地正确地决定了药剂的添加地点与攪拌方式,銅粗选回收率提高了6～7％(絕对数)而使銅的总回收率提高了1.55％。我矿为提高黄銅矿的浮选回收率,将黄药由过去加在攪拌槽改为加在球磨机中,提高了工艺过程的指标。試验和生产的情况簡介如下。小型浮选試验結果試验結果列入表1中,一系列类似試验的浮选回收率与攪拌时間的关系如图1。
The purpose of the pre-flotation slurry preparation is to create a favorable environment for the purpose of mineral floating, to maximize the recovery of valuable metals. How to make the medicaments work well on the surface of ore is very important in this respect. Should strictly control the number of drugs, because the amount of various drugs added too much or insufficient, can give the flotation process to adversely affect. In order to achieve a variety of agents can fully interact with the mineral surface, the location and mixing time to go through the experiment to decide. I mine through experimental research, more scientific than the right to determine the location of the addition of reagents and mixing methods, crude copper recovery increased 6 ~ 7% (absolute number) and the total copper recovery increased by 1.55%. In order to improve the flotation recovery rate of chalcopyrite mine, I changed the xanthate from the past in the mixing tank to the ball mill to improve the process indicators. Trial and production of the brief profile is as follows. The results of small flotation test results are listed in Table 1, a series of similar experiments flotation recovery rate and the relationship between the stirring time shown in Figure 1.