论文部分内容阅读
3.13 故障代码4-1的诊断流程(1)将点火开关置于 OFF 位,断开蓄电池的负极电缆,并等待3 min。(2)从 TRli 连接器上断开 TRlo连接器(图15),如图16所示,将 SRS模拟装置引线(F07XAZ-SZ30100)和SRS 充气机模拟装置(07SAZ-
3.13 DIAGNOSIS PROCEDURE FOR FAULT CODE 4-1 (1) Set the ignition switch to the OFF position, disconnect the battery negative cable, and wait for 3 min. (2) Disconnect the TRlo connector from the TRli connector (Figure 15) and connect the SRS dummy lead (F07XAZ-SZ30100) and the SRS inflator analog unit (07SAZ-