把尖嘴钳钳紧,用电钻在尖嘴钳剪线用的刀刃上剪段)钻Φ0.8mm、Φ1.0mm两个槽孔。再分别用Φ1.2mm、1.4mm的钻头稍扩一下(注意别扩穿了!),使这两个槽孔有一个薄薄的刃口。这样,一个具有剥线功能的尖嘴钳便做好了。使用时将电线头放在槽孔里,钳紧,一拉,电线外皮掉落。用它来剥削 Clamp the needle-nose pliers, use the electric drill to cut the line with the sharp-nosed pliers and cut off the blade, drill two holes of Φ0.8mm and Φ1.0mm. Then use Φ1.2mm, 1.4mm drill bit slightly expanded (note do not spread it!), So that these two slots have a thin edge. In this way, a pliers with wire stripping function will do well. When using the wire head on the slot, clamp, a pull, wire skin fall. Use it to exploit