Structure and high-temperature electrochemical properties of La0.60Nd0.15Mg0.25Ni3.3Si0.10 hydrogen

来源 :稀土学报(英文版) | 被引量 : 0次 | 上传用户:begoodboy
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The structure and high-temperature electrochemical properties of the as-cast and annealed (940 ℃, 8 h) La0.60Nd0.15Mg0.25Ni3.3Si0.10 hydrogen storage alloys were investigated. The X-ray diffraction revealed that the multiphase structure of the as-cast alloy with LaNi5 phase as the main phase was converted into a double-phase structure with La2Ni7 phase as the main phase after annealing. The surface morphology studied by scanning electronic microscope (SEM) showed that the annealed alloy had a much higher anti-corrosion ability than the as-cast alloy. Both alloys presented excellent activation characteristics at all test temperatures. The maximum discharge capacity of the as-cast alloy decreased when the test temperature increased, while the temperature almost had no effect on the annealed alloy. As the test temperature increased, the cyclic stability and charge retention of both alloys decreased, and these properties were improved significantly by annealing.
其他文献
Lithium triborate (LiB3O5) was synthesized by high temperature solid-state reaction method, and then rare earth oxides were doped into LiB3O5 to enhance its the
采用氢化NaH/Al+x TiC(x=0,5%,8%,10%,庵尔分摩)混合物的方法制备TiC掺NaAlH4配位氢化物,系统研究TiC催化剂含量对样品吸放氢行为的影响.结果表明:TiC能有效改善铝氢化钠的吸
采用差示扫描量热法(DSC),在不同加热速率下研究7150 Al-Zn-Mg合金在水淬、自然时效和人工时效状态下的固态反应.DSC曲线上不同的放热和吸热峰对应着不同的固态反应阶段.随着
N31-type phosphate laser glasses doped with different concentrations of Cu were prepared. Their optical loss coefficient at 1053 nm wavelength and nonradiative
Al合金表层的缺陷常常会导致腐蚀发生.因此,采取保护措施以提高铝合金的抗腐蚀性能是非常重要的.从电化学的角度出发,对固溶、淬火和时效处理工艺进行优化,以提高铝合金的强
钛合金由于具有高比强度、优越的耐腐蚀性和出色的耐热性等优良特性,已成功应用于航空航天、造船和化学工业.尽管钛合金具有合适的可焊性特点,但焊接方法极大地影响焊接接头
The effects of Ce, Y and Gd additions on the as-cast microstructure and mechanical properties of Mg-3Sn-lMn alloy were investigated and compared by using optica
轻型纸是一种纸质疏松、表面平滑、印刷性能好的印刷用纸。采用西康80/48阔叶木化机浆替化针叶木化机浆生产轻型纸,产品具有强度好,平滑度高,成本下降等特点。纸的松厚度,经
酶在制浆造纸工业中的应用,从20世纪80年代中期起迅速发展起来。化学浆的磨浆或打浆是生产纸及纸板极为关键的工段。分析了打浆酶预处理对漂白针叶木浆(NBKP)和漂白阔叶木浆(