论文部分内容阅读
使用TR801-A单板机对EPROM芯片2716(或者2758)固化程序时,其监控程序要求用户程序只能在始地址为2000H 的RAM 中调试,而实际上固化后的芯片是在始地址为0800的PROM1和始地址为1000的PROM2位置运行。因此通常调试好的程序在固化前
When using the TR801-A single board microcomputer to program the EPROM chip 2716 (or 2758), its monitoring program requires that the user program be debugged only in the RAM whose starting address is 2000H. In fact, the cured chip is actually started at the address 0800 PROM1 and PROM2 starting at 1000. Therefore, usually debugging a good program before curing