论文部分内容阅读
本大型室状煤气加热炉，沿炉顶纵向两排对称布置六个平焰烧嘴，这为提高炉温均匀性创造了前提。炉子设三个独立控温区，采用ＳＴＤ总线工业控制机，自动调节阀门开度，实现了控温精度高达±３℃，炉温均匀性为±１０℃。炉膛共安九支铂铑１０－铂热电偶，实现了控温、记录和报警三独立。煤气与空气管路压力，采用基量加积分控制模式，使压力能稳定在４０Ｐａ范围内。温度控制采用串级并联限幅ＰＩＤ模式，容易实现温度的精确控制，以及空气与煤气流量比例控制，使火焰保持在微还原状态，可减少加热锻件的氧化和烧损。
The large room-like gas furnace, along the roof two rows symmetrically arranged six flat-flame burner, which to improve the uniformity of the furnace created the premise. Furnace set up three independent temperature control zone, using STD bus industrial control machine, automatic adjustment of the valve opening, to achieve a temperature control accuracy of ± 3 ℃, temperature uniformity of ± 10 ℃. Furnace a total of nine platinum and rhodium 10-platinum thermocouple, to achieve the temperature control, recording and alarm three independent. Gas and air line pressure, the use of base plus integral control mode, the pressure can be stabilized at 40Pa range. Temperature control using cascade parallel limiting PID mode, easy to achieve accurate temperature control, and air and gas flow rate control, the flame remains in the micro-reduction state, can reduce the heating forging oxidation and burning.