论文部分内容阅读
钠钾合金加热器是NaK合金传热试验回路的加热装置,用于加热从回热器出来的钠钾合金工质至散热器性能测试段所需的进口温度。回路所需加热功率较大(300kW),因此,在钠钾合金传热试验回路主回路中设置了2台相同的加热器,二级加热钠钾合金工质。每台加热器最大加热功率
Sodium-potassium alloy heater is NaK alloy heat transfer test circuit heating device for heating the sodium-potassium alloy from the regenerator to the radiator performance test section required inlet temperature. The heating power required by the circuit is large (300kW). Therefore, two identical heaters are set in the main circuit of the sodium-potassium alloy heat transfer test circuit to heat the sodium-potassium alloy at the second stage. Maximum heating power per heater