Interfaces相关论文
The AA-stacked bilayer graphene/α-SiO2(001)interfaces with Si terminated atoms are studied in the presence of an electr......
Non-intrusive methods for eye tracking are important for many applications of vision-based human computer interaction. H......
Brain-machine interfaces(BMIs)aim at building a direct communication pathway between the brain and an external device,an......
In order to shorten the design cycle of the excavator working device, we have proposed a rapid modeling method for the e......
The interfacial effects on flow and heat transfer on micro/nano scale are discussed in this paper. Dif- ferent from bulk......
It is assumed that a pipeline is laid through a vertical fault fracture zone,and is excited by seismic ground motion mod......
There are four new achievements of this work on the theory and technology of explosive welding.(1) It has been found an......
通过一系列原位、非原位表征,包括透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)、程序升温解吸/还原/氧化(TPD/TPR/TPO)、X射线......
The smart grid has been such a hot topic recently.In this paper the hot topics in this field,such as the definition and ......
Recently,the performance and fabrication of thin-film thermoelectric materials have been largely enhanced.Based on this ......
骨架含强配位基的有机无机杂化多级孔材料合成是目前吸附研究的一个重要领域。以bis(hexamethylene)triamino-N,N-bisacetyl-phosp......
采用真空热压烧结工艺制备了纤维长度为3mm、质量分数为3%的短碳纤维增强2024铝基复合材料。研究了热压工艺对复合材料密度、晶粒......
简要阐述南京地铁1号线屏蔽门与信号系统之间的接口功能要求，屏蔽门控制原理及接口功能的实现，屏蔽门的安全应用，以及屏蔽门系统的操......
Effect of indium addition on the microstructural formation and soldered interfaces of Sn-2.5Bi-1Zn-0
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生......
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生......
Liquid-solid interface control of BFe10-1-1 cupronickel alloy tubes during HCCM horizontal continuou
Based on horizontal continuous casting with a heating-cooling combined mold(HCCM) technology,this article investigated t......
Numerical simulation of temperature field in horizontal core-filling continuous casting for copper c
The steady-state temperature field of horizontal core-filling continuous casting (HCFC) for producing copper cladding al......
A novel diffusion model considering curvature radius at the bonding interface in a titanium/steel ex
This article introduces an element diffusion behavior model for a titanium/steel explosive clad plate characterized by a......
High-chromium white cast iron(HCWCI) is one of the most widely used engineering materials in the mining and cement indus......
Copper-coated aluminum wires exhibit good electrical conductivity, high thermal conductivity, low contact resistance of ......
Microstructural characterization of Cu/Al composites and effect of cooling rate at the Cu/Al interfa
Cu/Al composites are of vital importance in industrial applications because of their numerous advantages.The influence o......
Effect of continuous induction annealing on the microstructure and mechanical properties of copper-c
Copper-clad aluminum(CCA) flat bars produced by the continuous casting–rolling process were subjected to continuous ind......
Interfacial characteristics and properties of a low-clad-ratio AA4045/AA3003 cladding billet fabrica
A low-clad-ratio AA4045/AA3003 cladding billet was fabricated using a semi-continuous casting process and was subsequent......
Effects of additives on the phase transformation, occurrence state, and the interface of the Ti comp
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生......
Simulation study on factors influencing the entrainment behavior of liquid steel as bubbles pass thr
In this study, a water/silicone oil interface was used to simulate the steel/slag interface in a converter. A high-speed......
Study on the separation process of non-metallic inclusions at the steel-slag interface using water m
The separation process of non-metallic inclusions at the steel–slag interface was simulated by physical modeling. Three......
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生......
为探究吕家坨井田地质构造格局,根据钻孔勘探资料,采用分形理论和趋势面分析方法,研究了井田7......
The developments of coated conductor technology have been reviewed. It is shown that the critical current density of hi......
在水泥砂浆中掺入PAM改性之废轮胎橡胶粒之机械性能,研究中应用了表面张力计及电子显微镜观察表面改性情形,并透过机械性能及耐久......
A kind of self-made AgCuTiSn braze alloy powder was used to join graphite and copper. The whole brazing process was perf......
The wettability of V-active PdCo-based alloys on Si3N4 ceramic was studied with the sessile drop method. And the alloy o......
The wettability and bonding in Ni/Ti(C, N) systems with multiple carbide additions were studied by sessile drop techniqu......
The wettability in Ni / Ti ( C, N) systems with various carbides additions was investigated by the sessile drop techniqu......
Three kinds of high volume fraction Sip/1199, Sip/4032 and Sip/4019 composites were fabricated by squeeze casting method......
A mixed-control model was developed to study the transformation character of ferrite formation by a ledge mechanism.A nu......
Abstract:Interface morphology has important influence on the bond quality of titanium clad steel plates.The mechanical p......
Microstructural characterization of Cu/Al composites and effect of cooling rate at the Cu/Al interfa
Cu/Al composites are of vital importance in industrial applications because of their numerous advantages. The influence ......
In the practical cold-spraying process,a number of particles impact onto a substrate and then form a coating.To study th......
The microstructure of a pressureless infiltrating 55vo1% oxidized SiC preform by Al-8Mg alloy was characterized by trans......
