This paper discusses the strength design methods in ASME Boiler and Pressure Vessel(B&PV)Code with a focus on the design......

The deformation and fracture behaviors of low-carbon steel, medium-carbon steel, and high-carbon steel were studied on i......

A transient,two-dimensional,coupled finite element model was employed to simulate the solidification and shrinkage of co......

Research status of high strength low alloy TRIP (transformation induced plasticity) steels for automobile structural pa......

On the basis of transformation kinetics and thermodynamics, the austenite-ferrite transformation start temperature duri......

The experiments were carried out to measure the mechanical properties of three grades of structural steels (Q235A, 16Mn......

A new kind of high strength, high toughness and high plasticity spring steel has been developed. The strength, the redu......

Dual phase heat treatment is an economical and effective way for improving the properties of low carbon steels and low-a......

Hot deformation experiments were carried out on Gleeble 1500 thermo-mechanical simulator. The bainite transformation aft......

Without considering the effects of alloying interaction on the Jominy end-quench curves, the prediction results obtained......

The delayed fracture behavior of medium-carbon high strength spring steel containing different amounts of boron (0.000 5......

Martensitic microstructure in quenched and tempered 17CrNiMo6 steel with the prior austenite grain size ranging from 6μ......

The dynamic recrystallization(DRX)behavior of Nb-Ti microalloyed steels was investigated by isothermal single compressio......

Laser has been widely applied for advanced material processing,such as welding of advanced high strength steels(AHSS) fo......

Small dispersoid particles inhibit recrystallization which is critical in controlling the grain structure of many high s......

The effects of overageing (OA) and vanadium addition on microstructure and properties of cold-rolled low-carbon Si-Mn du......

The hydrogen-induced cracking (HIC) behavior of X80 pipeline steel was studied by means of electrochemical charging, hyd......

CCT curves of Mn-Si steels with different manganese contents or carbon contents were determined. The results show that t......

High-strength quenched and tempered (HSQT) steels have been widely used in structural applications where light weight is......

Most commercialized coronary stents are made of 316L stainless steels due to its good combination of properties,and curr......

In this study, resistance spot weldability of 180 grade bake hardening steel (BH180), 7123 grade interstitial free steel......

On-line thermo mechanical controlled processing(TMCP) was conducted to develop the third generation high strength low al......

The effect of rare earths on the morphology and microstructure of eutectic carbides in M2 high speed steel was studied. ......

Currently commercialized coronary stents are mainly made of the medical 316L stainless steel and cobalt-based alloy(L605......

A new design of copper-bearing non-quenched plastic mold steel is presented and explained. Two kinds of microstructure c......

Specimens of two different kinds of bake hardening steels(BH-Mn and BH-P) were prepared and treated with different annea......

A mathematic model has been presented to predict the decarburization kinetics of grain-oriented silicon steel sheet in t......

Nanoindentation is an attractive characterization technique,as it not only measures the local properties of a material b......

With the improvement of the clean steel by degrees, the functions of rare earth metals in steel are more focused on modi......

In the Collaborative Research Centre 761’s“Steel ab initio-quantum mechanics guided design of new Fe based materials,......