Effect of inter-layer strain interaction on the optical properties of Ge/Si(001) island multi-layers

来源 :Optoelectronics Letters | 被引量 : 0次 | 上传用户:ngnza
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In this paper we present a study on the influence of the number and the thickness of silicon spacer layer on the optical properties of single-and multi-layers of self assembled Ge/Si(001) islands performed by means of cathodoluminescence spectroscopy,high resolution X-ray diffraction and transmission electron microscopy. In single-layer sample,we do not evidence dependence of the island no-phonon emission peak position on the silicon cap-layer thickness. In multi-layer samples having a thin(33 nm) silicon spacer layer the no-phonon emission energy value progressively blue-shifts for an increasing number of island layers. This is interpreted as an enhanced intermixing driven by the strain interaction existing between island layers. On the contrary,island emission energy position is independent on the number of layers in the sample series having a thicker spacer layer(60 nm) . These findings are consistent with the X-ray diffraction observation that islands belonging to different layers have the same composition. As a consequence we can conclude that multilayers with 60-nm spaced islands layer are more homogeneous and ordered. In this paper we present a study on the influence of the number and thickness of silicon spacer layer on the optical properties of single-and multi-layers of self assembled Ge / Si (001) islands performed by means of cathodoluminescence spectroscopy, high resolution X-ray diffraction and transmission electron microscopy. In single-layer sample, we do not evidence dependence of the island no-phonon emission peak position on the silicon cap-layer thickness. In multi-layer samples having a thin (33 nm) silicon spacer layer the no-phonon emission energy value progressively blue-shifts for an increasing number of island layers. number of layers in the sample series having a thicker spacer layer (60 nm). These findings are consistent with the X-ray diffraction observation that islands belonging to different layers have the same composition. As a consequence we can conclude that multilayers with 60-nm spaced islands layers are more homogeneous and ordered.
其他文献
四辊卷板机是板材弯曲成形的主要设备,可不用预弯板材端部,一次卷制成圆柱形、圆弧形及圆锥形工件。而三辊卷板机需借助专用工具或其它压弯设备,将板材端部顶弯,才能卷制成
恬淡虚无,思想集中。神情自然,气和心平。意念导引,节节贯通。慢练潜修,用力匀轻。上下协和,动中求静。姿势舒展,劲力完整。动作转换,虚实分清。一势完成,似停非停。上身中正
1.电蚀过程的极效应现象火花放电过程中,电极的阳极和阴极表面分别受到电子和离子的轰击以及瞬时热源的作用,因此它们同时都会遭到电腐蚀。但是矛盾着的两方面中,必有一方面
铸型材料 在铸造车间中用各种材料来制作外模和砂芯。它们按条件不同可分为铸型原材料、外模砂和芯砂(或混合料),以及铸型辅助混合料。铸型原材料可分为两类;基料和辅料。
前言众所周知,在变形金属中经常存在着再结晶现象。按其出现的时机差别可分为静态再结晶和动态再结晶,前者是在金属变形后的受热条件下产生的,而后者却早在变形过程中就已经
穿带过程中张力、压力和厚度等激烈变化,传动系统的动态和静态速降,使穿带过程复杂和困难。因此,保证咬人顺利、张力平稳和头部不合格段减少是努力目标。采用头部增厚可使咬
本文介绍了三轴气浮转台的支承轴承用的高精度大球的研磨工艺。这种轴承的精度和表面光洁度都很高,加工很困难。为实现加工高精度的大球,本文从研磨装置的设计,磨具、磨料和
江西矿山机械厂原冲床操作中一直是手工送料,效率低,劳动强度大,更严重的是不安全。为了改变这种落后状况,冲压工人在群众性的技术革新运动中自制了一种结构简单的自动送料
水轮机叶片长期在冲击,疲劳和弯曲等复杂受力情况下工作,而且铸造成型不可避免地存在着缺陷和裂纹。由于叶片长期在水下运转不能对其裂纹扩展进行监测,从而要求叶片用钢有较
本文在分析对比性试验的基础上指出:对低合金渗碳钢而言,渗碳后的较好热处理工艺是较高温度的一次淬火(试验温度为840℃),而不是高、低温的二次淬火。从而对低合金渗碳钢渗碳